This interface can be configured within TVMobilis settings. You should see an interface where you can browse your videos by name, date or folder.Consider reading the TV's manual for further details on how to do this. Start up the DLNA Server (TVMobili) if you haven't done yet.For Smart View, select the TV you want to connect Start now. Depending on your device: On the Screen mirroring display of your device, tap Start select OK Tap the name of your TV. Select Screen mirroring, Smart View, or similar. ![]() Plug in the LAN cable and configure the TV so it can "see" the computer in the LAN Select Device connection or Connected devices.Once TVMobili has scanned your videos, you'll be able to access them over your TV. Step 2 – Connect the TV to the DLNA Server Once installed, you need to tell it where your videos are. It is freely available for almost all platforms and seems to support a large number of media formats and client devices. That being said, I personally use TVMobili. You didn't specify your operating system, and there are many DLNA servers for Windows alone. Step 1 – Install a DLNA server on your PC In order to have access to the videos, your computer needs to become a DLNA server, which the TV should detect automatically, once they are in the same network. Connect a device to the TV and send content.Your TV seems to access media over DLNA, a technology which allows you to stream media over the network. Connect a device to the TV and send content. The SSID and the WPA Key that appears on the TV will have to be entered into the device.įor details on the Wi-Fi setting of the Wi-Fi Direct device, refer to Step 2.Check the manual supplied with the device for information regarding the WPS setting. The WPS setting is not available on all Wi-Fi Direct-capable devices.On the device, go to the wireless network setting screen, select WPS (if capable, for automatic setup), or perform a scan to connect to the TV.If Wi-Fi Direct connection fails, follow these steps: Connect the Wi-Fi Direct device to the TV.Select Wi-Fi Direct or Wi-Fi Direct Mode.For model-specific information, check the specifications or supplied operations guide. IMPORTANT: Some models require the UWA-BR100 USB Wireless LAN adapter to be connected to the TV to enable this feature. The SSID and the WPA Key will be displayed on the TV screen.Select Built-in Wi-Fi or Built-in Wireless LAN, and set it to ON.Note: If the TV shows Network, skip to Step 6. On the supplied remote control, press the HOME button. ![]() The message Reset will appear momentarily on the TV screen. While holding the UP ARROW button, press and release the POWER button on the TV set. Make sure the remote control is pointed towards the front and center of the TV.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |